Can You Paint Vinyl Siding Without Ruining It?

Yes, vinyl siding can be painted, as long as the panels are sound and clean and the new color is no darker than the original or comes from a paint maker's vinyl-safe palette. The color limit exists because, as Sherwin-Williams explains, "darker colors absorb more heat, causing the plastic vinyl to warp, buckle and distort."
The bigger catch is the warranty: Alside's vinyl siding warranty, effective September 26, 2013, says, "The Warranty does not apply to Products that have been painted, varnished, or similarly coated over the manufacturer's original finish unless coating is authorized by Alside pursuant to this Warranty." On the paint side, Benjamin Moore's 2019 technical data sheet for Regal Select Exterior REVIVE for Vinyl Siding says, "Do not paint vinyl with any color darker than the original color or having a Light Reflective Value (LRV) of less than 55 unless it is from this palette and comports with the specific vinyl manufacturer guidelines," while Sherwin-Williams offers 100 VinylSafe colors, "including a limited selection of darker colors." This guide covers the warranty question, why dark paint warps vinyl, how to pick a safe color and paint, and when new siding makes more sense.

Does painting vinyl siding void the warranty?
It can end your coverage. Alside's warranty excludes painted siding unless Alside authorizes the coating, and CertainTeed's Lifetime Limited Warranty for vinyl siding (Code No. CTS230, effective August 1, 2015) says the warranty is void for siding that has been painted, varnished, refinished or similarly coated over the original finish unless CertainTeed authorizes it.
Neither exclusion is a flat ban, since both leave room for coating the maker approves, so the safe move is to contact the siding maker in writing before any paint goes on and keep the reply with your house records.
Coverage also follows the house. Alside's warranty transfers to a new owner "as a Fifty (50) Year, Limited Non-Prorated Warranty beginning from the date of original installation of Products," so painting without approval can affect what a future buyer inherits. Warranty terms change over the years, so read the version that came with your siding, not a generic copy.
Why does dark paint warp vinyl siding?
Vinyl moves with temperature even before paint enters the picture. The Vinyl Siding Institute's installation manual says vinyl siding can expand and contract 1/2 inch or more over a 12 foot, 6 inch length during normal, year-round changes in temperature.
Paint changes how much heat the panel takes in. Sherwin-Williams says dark paint transfers the sun's heat to the vinyl underneath and that once vinyl siding expands dramatically, it cannot contract back to its original dimensions. Its VinylSafe page puts the risk plainly: "Using a dark color on top of a lighter would cause the substrate to buckle."
How light does the paint color need to be?
Sherwin-Williams describes the traditional rule as painting vinyl siding in a shade no darker than the original color, with whites, off-whites, pastels and very light colors as good choices. Benjamin Moore's REVIVE data sheet sets a number for its own vinyl paint: no color with a Light Reflective Value below 55, unless the color comes from its vinyl palette and fits the siding maker's guidelines.
A vinyl-safe color is a paint color that a paint maker has formulated to resist warping on sound, stable vinyl siding. Sherwin-Williams says its VinylSafe colors are "formulated to resist warping or buckling when applied to a sound, stable vinyl substrate," and that the palette includes some darker shades. Benjamin Moore's current contractor guide names a palette of 75 handpicked Colors for Vinyl for select exterior paint lines.
Those darker options carry the paint maker's scope, sound and stable vinyl only, and they do not change what the siding warranty says. Ask the paint store for a color's LRV before you buy, and check it against the siding maker's guidelines. For help narrowing the look first, see this guide to choosing a siding color.
What kind of paint works on vinyl siding?
Pick a paint its maker sells for vinyl siding. Sherwin-Williams lists its VinylSafe colors in Emerald Rain Refresh, Emerald, Duration, Resilience, Latitude and SuperPaint latex paints, plus SnapDry Door and Trim Paint. Benjamin Moore's REVIVE for Vinyl Siding is self-priming, covers 350 to 450 square feet per gallon according to its data sheet, and is not for polypropylene siding.
Skip oil-based coatings. Sherwin-Williams says they are not recommended on vinyl because of poor flexibility, and that a primer is usually not needed under an acrylic topcoat. Benjamin Moore's guide adds that pitted or porous vinyl needs primer.
How do you prep and paint vinyl siding?
Cleaning comes first. Benjamin Moore's data sheet says the surface must be cleaned and any mildew, chalk or dirt removed, and its guide adds a clean-water rinse and full drying time before painting.
For the wash itself, the Vinyl Siding Institute's manual recommends an ordinary long-handled car washing brush with soft bristles and warns that stiff bristle brushes or abrasive cleaners may change the gloss and leave the siding looking splotchy. If mildew is a problem, it adds 1 quart of liquid laundry bleach to a mix of 1/3 cup powder detergent, 2/3 cup powder household cleaner and 1 gallon of water; read each product's label before mixing it with bleach.
A working order that follows those sources:
Wash from the bottom of the wall up, which the Vinyl Siding Institute says prevents streaking.
Rinse with clean water and let the siding dry.
Prime any pitted or porous areas.
Check that air and surface temperatures are at least 40 degrees F and the surface is no hotter than 100 degrees F.
Stay out of direct sun so the panels are not hot to the touch.
Apply the coats the label calls for; the REVIVE data sheet calls for two after prep.
The 40 degree floor comes from Benjamin Moore's data sheet, and its guide adds the advice on direct sunlight. On a cool spring or fall morning in Irwin or North Huntingdon, check the siding's surface temperature, not just the air, before you open the can. For routine care once the job is done, see this guide to vinyl siding maintenance.
When does replacing faded vinyl make more sense than painting?
Start with a warranty check. Alside's warranty says, "Excess fade is defined as a change greater than 4 Hunter Units of Delta E," and CertainTeed's warranty sets its own fade limit using ASTM D2244, so faded siding may qualify for a claim. Since painting can end that coverage, ask the siding maker about fade before you paint over it.
Damage that paint cannot fix points toward new siding. Sherwin-Williams says warped siding may have to be replaced, and both the Alside and CertainTeed warranties exclude distortion from heat sources such as grills, fire and reflection from windows. VinylSafe colors are also scoped to sound, stable vinyl, which leaves out panels that are already warped.
If the siding is cracked, loose or worn through, compare the options in this guide to repairing vs replacing siding, and see how long vinyl siding lasts in Western PA before you decide.
FAQ
Will painting vinyl siding void the warranty?
It can. Alside's warranty does not apply to siding painted over the original finish unless Alside authorizes the coating, and CertainTeed's CTS230 warranty is void for painted siding without its approval. Get written approval from the siding maker first.
Can you paint vinyl siding a darker color?
Only with a color made for it. Benjamin Moore's REVIVE data sheet rules out colors darker than the original or below LRV 55 unless they come from its vinyl palette, and Sherwin-Williams' VinylSafe line includes "a limited selection of darker colors" for sound, stable vinyl.
Do you need primer to paint vinyl siding?
Only on pitted or porous areas, according to Benjamin Moore, whose REVIVE vinyl paint is self-priming. Sherwin-Williams takes a similar line for acrylic topcoats and points homeowners to the siding maker's prep instructions.
What temperature is too cold to paint vinyl siding?
Below 40 degrees F. Benjamin Moore's REVIVE data sheet says not to apply the paint when air and surface temperatures are below 40 degrees F, and it caps the surface temperature at 100 degrees F.
Can you paint vinyl siding that has already warped?
Warped panels fall outside Sherwin-Williams' VinylSafe guidance, which covers sound, stable vinyl only, and the company notes that warped siding may need replacing instead.
Is oil-based paint okay on vinyl siding?
Sherwin-Williams advises against it because oil-based coatings have poor flexibility, and the Vinyl Siding Institute notes that vinyl expands and contracts with normal temperature changes.
Siding replacement from Gerken Roofing in Irwin
Working with lines that include Alside vinyl, insulated vinyl and Composite Cladding plus CertainTeed Monogram and MainStreet, Gerken Roofing installs and replaces siding on homes in Irwin, North Huntingdon and other Westmoreland County towns. Its siding page features Alside's Contemporary and Architectural Siding Color Collections, and the company's repairs page notes that siding showing significant wear may need to be replaced. Quotes from this locally owned, family run business are free and come with no obligation.
Visit Gerken Roofing or call 724-515-5551 today. Contact us for more information.





Comments